# Troubleshooting

Start with `gitea-macos-runner doctor` — it catches most misconfiguration before you go
symptom-hunting. Then find your symptom below.

Useful log commands throughout:

```sh
# Daemon logs, live
log stream --predicate 'process == "gitea-macos-runner"' --info

# Daemon logs, last hour
log show --predicate 'process == "gitea-macos-runner"' --info --last 1h

gitea-macos-runner service status
```

---

## Quick reference

| Symptom | Cause | Fix |
| --- | --- | --- |
| VM won't start; entitlement / `com.apple.security.virtualization` error | Running an unsigned binary, or one outside the signed `.app` bundle | `make sign` (or re-run `make install`); invoke the installed bundle, never `.build/release/…` |
| `virtualMachineLimitExceeded` at boot | macOS allows at most **2** concurrent macOS VMs | Set `scheduler.maxConcurrentVMs` ≤ 2; kill stray VMs from earlier runs |
| VM boots but never gets an IP | DHCP lease not yet written, or Local Network privacy denial (macOS 15+) | Check `/var/db/dhcpd_leases`; grant Local Network permission or pre-authorize the subnet |
| Runner not listed under Privacy & Security → Local Network | Expected — the list is populated only after the app first attempts a local connection; it cannot be pre-approved | Boot one VM by hand from a GUI Terminal to create the entry, or (better on CI) allowlist the subnet with `defaults write com.apple.network.local-network` |
| SSH times out on a freshly built image | Guest macOS < 27, so provisioning options were ignored and Setup Assistant is waiting | Rebuild the image from a macOS **27+** IPSW |
| VMs boot in a loop; every teardown says `reason=cancelled` and nothing is logged between the lease and the teardown | `scheduler.bootTimeoutSeconds` is below the guest's *worst-case* boot on a contended host, so each clone is killed while still starting — and each replacement makes the next one slower | Raise `scheduler.bootTimeoutSeconds` (default 900) and reduce the number of concurrent guests; see [The daemon boots VMs forever](#the-daemon-boots-vms-forever-and-every-teardown-says-reasoncancelled) |
| `ssh failed: cannot connect … No route to host) (errno: 65)` part-way through provisioning | macOS 15+ Local Network privacy blocking the app — the grant is keyed on the executable's UUID, so `make install` withdraws it | Allowlist the subnet (`192.168.64.0/18`) and **reboot**; see [SSH fails with "No route to host" mid-run](#ssh-fails-with-no-route-to-host-errno-65-mid-run) |
| Allowlist is set but guests are still unreachable | It names `192.168.64.0/24` while the NAT has moved to `192.168.65.x` | Widen it to `192.168.64.0/18` and reboot; `doctor` now warns about too-narrow allowlists |
| `SecKeyCreateRandomKey` / "Interaction is not allowed" | `login.keychain` is locked — no GUI session | Run as a LaunchAgent in an unlocked GUI session; enable auto-login |
| Job stays queued forever | Label mismatch, or the daemon isn't running/reaching Gitea | Use bare label names in `runs-on`; match `runner.labels`; check daemon logs |
| `actions/checkout` fails instantly | Node.js missing from the guest image | `gitea-macos-runner image provision <name>` |
| Runner rows piling up in the Gitea UI | VMs killed uncleanly; registrations orphaned | Reconcile loop cleans them; force it by restarting the daemon; delete manually if needed |
| `doctor` says `runner download url → 403` but the URL works in a browser | Old build: the check used `HEAD`, and the presigned redirect target is signed per method | Upgrade — the check now uses a ranged `GET`. If it persists, the asset really is missing |
| Disk filling up | Copy-on-write clones grow as jobs write | Raise `storage.minFreeDiskGB`; delete stale clones in `storeDir/vms` |
| `image build` appears to hang during install | Normal — macOS install is slow | Wait. **Do not stop the VM mid-install**; if you did, delete the image and rebuild |
| `image build` prints its banner and then nothing, at 0% CPU | Old build: the build task was queued behind the `NSApplication` run loop and never started | Upgrade — the task is now detached. Stage lines should appear within seconds |
| `image build` stuck at `loading restore image metadata…` | A truncated or partial `.ipsw` — the framework blocks rather than failing | Upgrade (the file is now size- and magic-checked first); re-download the IPSW |
| `provisioning failed: … Failed to lock auxiliary storage` after install | The installer's VM had not yet released `nvram.bin` when first boot started | Upgrade — the install now drains its queue and first boot retries for 30 s. Re-run `image build`; it resumes |
| `image build` says `image 'default' already exists` after a failed first boot | Old build: an installed-but-unprovisioned bundle was treated as a finished image | Upgrade — `image build` now resumes it instead of refusing |

---

## VM won't start — entitlement error

**Symptom.** Any VM operation fails immediately with an error naming
`com.apple.security.virtualization`, or a generic "operation not permitted" from
Virtualization.framework.

**Cause.** Virtualization.framework checks the entitlement on the calling binary, and entitlements
are only honoured on a signed binary inside a proper `.app` bundle. The raw product of
`swift build` has neither.

**Fix.**

```sh
make install       # build → bundle → sign → install (make sign alone re-signs in place)
codesign -d --entitlements - ~/Applications/GiteaMacosRunner.app   # verify
```

The output must list `com.apple.security.virtualization`. Then confirm the command you're running
resolves to the installed bundle's binary — `which -a gitea-macos-runner` should point at
`~/Applications/GiteaMacosRunner.app/Contents/MacOS/gitea-macos-runner`, not at
`.build/release/gitea-macos-runner`. Ad-hoc signing is sufficient; you do not need a paid developer
account.

---

## `virtualMachineLimitExceeded`

**Symptom.** The first VM boots fine; a second or third fails with `virtualMachineLimitExceeded`.

**Cause.** macOS permits **two** concurrent macOS guests per host. This is an Apple kernel and
licensing limit, not a resource constraint — more RAM will not raise it.

**Fix.** Set `scheduler.maxConcurrentVMs` to 2 or less. If you're already at 2 and still hitting
the limit, a VM from a previous run is still alive — check for stray processes and for leftover
directories under `storeDir/vms`, then restart the daemon so it starts from a clean state.

To handle more macOS jobs in parallel, add another Mac.

---

## VM starts but never gets an IP

**Symptom.** The VM boots (you can see it progress if you use `vm boot`), but the daemon reports
that it could not resolve the guest address, or gives up at `scheduler.bootTimeoutSeconds`.

**Cause.** The daemon resolves the guest's NAT address from the host's DHCP lease file, which is
only written once the guest requests a lease — several seconds after the boot screen appears. If the
address never appears at all, the usual culprit on macOS 15+ is the **Local Network privacy
prompt**: a LaunchAgent that was never granted permission (or was denied) cannot talk to the guest.

**Fix.**

1. Check the lease file after the guest has been up for ~30 seconds:

   ```sh
   cat /var/db/dhcpd_leases
   ```

   An entry with a recent `lease` timestamp and the guest's MAC means networking is fine and the
   problem is timing — raise `scheduler.bootTimeoutSeconds`.

2. No entry at all: pre-authorize the VM subnet, then **reboot** (these are read at boot):

   ```sh
   sudo defaults write com.apple.network.local-network \
     AllowedEthernetLocalNetworkAddresses -array "192.168.64.0/18"
   sudo defaults write com.apple.network.local-network \
     AllowedWiFiLocalNetworkAddresses -array "192.168.64.0/18"
   ```

   The `/18` is deliberate: the NAT subnet is chosen at runtime and slides to the next free /24
   (192.168.65.x, .66.x, …) when one is taken, so a pinned `192.168.64.0/24` breaks the day it
   moves. `doctor` reports `local network access` as a pass once it sees an allowlist covering that
   span. This is the deterministic fix for an unattended host —
   see [Local Network: the app is not listed in System Settings](#local-network-the-app-is-not-listed-in-system-settings)
   for why the interactive grant is not.

3. Or grant it interactively: run `gitea-macos-runner vm boot --image default` from a Terminal in
   the GUI session and click **Allow**. The app is not listed under **System Settings → Privacy &
   Security → Local Network** until it has made that first attempt.

---

## Local Network: the app is not listed in System Settings

**Symptom.** `doctor` prints the `local network access` note telling you to approve the app under
**System Settings → Privacy & Security → Local Network**, but the runner is nowhere in that list —
so there is nothing to switch on.

**Cause.** This is expected, not a bug. The Local Network list is populated lazily: an app appears
there only *after* it has actually attempted a local-network connection and been evaluated. It
cannot be pre-approved. A freshly installed runner that has not yet reached a guest has no entry.

There is also nothing to query, so `doctor` cannot tell you the grant's state. Unlike most macOS
privacy controls, Local Network privacy is not stored in TCC — per
[TN3179](https://developer.apple.com/documentation/technotes/tn3179-understanding-local-network-privacy)
the checks live "deep in the networking stack" as a Network Extension packet filter, so the
permission is absent from `TCC.db` and `tccutil reset` does not apply to it.

**Fix — interactive.** Make the app connect once, from a GUI session where a human can answer:

```sh
gitea-macos-runner vm boot --image default
```

Click **Allow**. The entry now exists and can be toggled later. Do not wait for the LaunchAgent to
trigger it; a background agent cannot answer the prompt, so it simply fails to reach the guest.

**Fix — deterministic, and what to use on a CI box.** Allowlist the VM subnet instead. It is keyed
on the network rather than on the app, so no prompt is involved and nothing needs redoing:

```sh
sudo defaults write com.apple.network.local-network \
  AllowedEthernetLocalNetworkAddresses -array "192.168.64.0/18"
sudo defaults write com.apple.network.local-network \
  AllowedWiFiLocalNetworkAddresses -array "192.168.64.0/18"
```

Reboot afterwards. `doctor` then reports `local network access` as a **pass**. Both keys are
Apple's, documented in TN3179; the same pair is what [Tart's FAQ](https://tart.run/faq/) recommends
for this exact problem on CI hosts.

> **Why the interactive grant does not stick here.** This project ships an **ad-hoc signed** bundle
> (`codesign --sign -`), and TN3179 notes that "local network privacy uses your main executable UUID
> as part of its implementation". The linker writes a new `LC_UUID` on essentially every rebuild, so
> a rebuilt-and-reinstalled runner can read as a *different* program and prompt again — while the
> old row lingers, since macOS provides no way to reset a Local Network decision to undetermined.
> Expect duplicate entries after a few upgrades. The subnet allowlist avoids all of this.

---

## SSH times out on a freshly built image

**Symptom.** The VM boots and gets an IP, but SSH never connects. Attaching a display to the guest
shows **Setup Assistant** — the region/Apple ID welcome flow — rather than a login window.

**Cause.** The image builder uses `VZMacGuestProvisioningOptions` to create the admin account, enable
Remote Login, and skip Setup Assistant. That API requires **macOS 27 or newer in the guest as well
as the host**. An older guest **silently ignores** the options: no error, no account, no SSH server
— it just sits at first-run setup forever.

**Fix.** Rebuild the base image from a macOS 27+ IPSW:

```sh
gitea-macos-runner image delete default
gitea-macos-runner image build --ipsw ~/Downloads/UniversalMac_27.0_XXXXX_Restore.ipsw
```

Verify the host is also 27+ (`sw_vers`). There is no way to make a pre-27 guest work unattended
with this builder.

---

## The daemon boots VMs forever and every teardown says `reason=cancelled`

**Symptom.** A job is queued, the daemon is running, and the log repeats the same three lines with a
new runner name each time — but no runner ever appears in Gitea:

```
info orchestrator: job=1 runner=macos-vm-1cd8e83f… slot=0 booting VM
info orchestrator: ip=192.168.65.233 slot=0 guest leased address
info orchestrator: reason=cancelled slot=0 tearing down slot
```

Note what is missing: nothing between the lease and the teardown, and a teardown reason that names
no cause.

**Cause.** The guest takes longer to reach `sshd` than `scheduler.bootTimeoutSeconds` allows, so the
scheduler tears the slot down while it is still coming up — usually seconds before it would have
succeeded. This is not a timeout that fires once; it is a **livelock**. The replacement clone starts
from zero *and* adds load to an already contended host, so the next boot is slower still and the
loop never converges.

Several Virtualization guests on one Mac is enough to cause it: a guest that reaches SSH in 40
seconds on an idle host can take four or five minutes when it is sharing the machine, and each slot
holds 4 vCPU and 8 GB for the whole attempt. Check with `uptime` inside a guest — a load average in
the tens means the guest is starved, not broken.

**Fix.**

1. Raise `scheduler.bootTimeoutSeconds`. The default is 900; treat it as a ceiling on the guest's
   *worst* case, not its typical one. Timing out too early costs far more than noticing a genuinely
   wedged guest late.

2. Reduce contention. Count what is actually running:

   ```sh
   ps -Ao pid,rss,etime,comm | grep -i -e virtual -e vmnet
   ```

   Virtualization guests belonging to *other* tools compete for the same cores and the same two-VM
   macOS limit. Shut down what you are not using, or lower `scheduler.maxConcurrentVMs`.

3. Confirm the guest itself is fine, independently of the daemon, with `doctor` — its `guest ssh`
   check authenticates against whichever slot currently holds a lease:

   ```sh
   gitea-macos-runner doctor
   ```

**If you are on an older build**, upgrade: the empty gap in that log was three bugs, all now fixed.
`waitForSSH` was handed the full `bootTimeoutSeconds` even though the scheduler's clock had started
before the clone — so the scheduler always fired first and `waitForSSH`'s own error was unreachable;
its per-attempt failures were only ever reported in that unreachable error; and the teardown
overwrote the planner's reason with `cancelled`. Current builds log `waiting for guest ssh` with the
attempt count and the last error while it is happening, and report
`reason="boot timeout: provisioning for 312s (limit 300s)"`.

---

## `SecKeyCreateRandomKey` / "Interaction is not allowed"

**Symptom.** The daemon starts but fails during VM setup with a Security-framework error mentioning
`SecKeyCreateRandomKey`, `errSecInteractionNotAllowed`, or "Interaction is not allowed". Often it
works when you run the daemon by hand in Terminal and fails under launchd.

**Cause.** The **`login.keychain` is locked.** macOS 15+ requires it unlocked for key operations the
VM lifecycle performs, and it is only unlocked inside a live, logged-in GUI session. A LaunchDaemon,
an SSH-only session, or a Mac sitting at the login window all fail this.

**Fix.**

1. Confirm the service is installed as a **LaunchAgent**, not a LaunchDaemon:
   `gitea-macos-runner service install` does the right thing; a hand-written plist in
   `/Library/LaunchDaemons` does not.
2. Ensure the runner user is actually logged in with the desktop loaded. Enable auto-login:
   **System Settings → Users & Groups → Automatically log in as**.
3. Prevent the machine from returning to a locked state:

   ```sh
   sudo pmset -a sleep 0 disablesleep 1
   ```

   and disable "Require password after screen saver begins" for the runner user.

Connecting over Screen Sharing to a Mac at the login window does not unlock `login.keychain` for
launchd's session — auto-login is the reliable answer on a dedicated CI Mac.

---

## Job stays queued and no VM boots

**Symptom.** The workflow shows as queued in Gitea indefinitely. Nothing appears in the daemon logs
about it.

**Causes and fixes, in the order worth checking:**

1. **Label mismatch.** `runs-on` must use **bare label names** (`macos-arm64`), and every label
   listed must appear in the host config's `runner.labels`. The `:host` suffix used at registration
   is runner-side only and must never appear in workflow YAML. A single typo produces exactly this
   symptom with no error anywhere.

2. **Daemon not running or not polling.**

   ```sh
   gitea-macos-runner service status
   log show --predicate 'process == "gitea-macos-runner"' --info --last 15m
   ```

   You should see a poll every `scheduler.pollIntervalSeconds`.

3. **Gitea too old.** The queued-jobs API with the `labels` field requires **Gitea ≥ 1.25**. On an
   older instance the daemon can never see jobs. `doctor` reports the server version.

4. **Admin PAT wrong or under-scoped.** The token must belong to a **site admin** and carry
   `read:admin` + `write:admin`. Test it:

   ```sh
   curl -H "Authorization: token $TOKEN" \
     "https://gitea.example.com/api/v1/admin/actions/jobs?status=queued"
   ```

   A 403 means scope or admin status; a 404 usually means the Gitea version predates the endpoint.

5. **A VM booted but its runner never came online.** Then the job is queued *and* you see VM
   activity in the logs. Look at registration failures — most often an invalid or invalidated
   registration token (see below).

6. **Job expired.** Gitea abandons a job after `ABANDONED_JOB_TIMEOUT` (default 24h). If the daemon
   was down longer than that, the job is gone; re-run it.

### Registration fails with an invalid token

Registration tokens are reusable, but **creating a new token for a scope invalidates the previous
one**. If someone clicked "create new registration token" in the Gitea UI, the token in your
`registrationTokenFile` is now dead. Re-seed
`GITEA_RUNNER_REGISTRATION_TOKEN` on the server (and restart Gitea), or switch to
`fetchRegistrationTokenViaAPI: true`. See
[setup.md §1.3](setup.md#13-choose-a-registration-token-strategy).

---

## `actions/checkout` fails instantly

**Symptom.** The job starts, the runner connects, and the very first step fails immediately —
typically a spawn error naming `node`, or an unhelpful non-zero exit before any output.

**Cause.** Gitea Actions' JavaScript actions (`actions/checkout` and most of the ecosystem) run by
spawning `node` inside the guest. **Node.js is required in the image**, and if provisioning was
interrupted it may be absent.

**Fix.** Confirm, then reprovision:

```sh
gitea-macos-runner vm boot
ssh admin@<guest-ip> 'node --version && git --version'

gitea-macos-runner image provision default
```

If `git` is also missing, the provisioning step failed early — check the build log and rerun
provisioning.

---

## Runner rows piling up in the Gitea UI

**Symptom.** **Site Administration → Actions → Runners** accumulates offline `macos-vm-…` entries.

**Cause.** Gitea deletes an ephemeral registration when its job completes normally. A VM that is
killed uncleanly — daemon crash, host power loss, `jobTimeoutMinutes` kill — never reaches that
point, so the row is orphaned.

**Fix.** Usually nothing: the daemon's reconcile loop sweeps orphaned registrations every
`scheduler.reconcileIntervalSeconds` (default 300) via
`DELETE /api/v1/admin/actions/runners/{id}`, plus a daily midnight sweep. Orphans should clear
within a few minutes.

If they persist, the daemon's admin PAT probably lacks `write:admin` — check the logs for delete
failures. To clear them by hand, delete the rows in the Gitea UI; they are inert (offline
registrations that have already been spent cannot receive jobs).

---

## `doctor` warns "runner download url → 403"

**Symptom.** `doctor` reports the runner download URL as a 403, but pasting the same URL into a
browser downloads the binary fine:

```
! runner download url    https://gitea.com/gitea/runner/releases/download/v3.0.2/… → 403
```

**Cause.** gitea.com does not serve release assets itself. It answers with a `303 See Other`
pointing at a presigned object-storage URL, and that signature covers the HTTP method of the
request that minted it. A `HEAD` probe therefore gets a HEAD-signed URL — and then the HTTP client,
following the 303, rewrites the method to `GET` (RFC 7231 §6.4.4) and replays the signed URL with
the one verb it was not signed for. The store answers `403 SignatureDoesNotMatch`. Nothing is
actually wrong with the asset.

**Fix.** Upgrade — the check now probes with a one-byte ranged `GET` (`Range: bytes=0-0`), the same
verb `image provision` uses for the real download, and falls back to a `HEAD` only if the range is
rejected. If you still see a 403 after upgrading, the asset really is gone: check `runner.version`
and `runner.runnerDownloadURL` for a `darwin-arm64` build.

---

## Disk filling up

**Symptom.** Free space falls steadily; the daemon starts refusing to launch VMs, citing
`storage.minFreeDiskGB`.

**Cause.** Each VM is an APFS copy-on-write clone of the base image. The clone is free at creation
but **grows as the job writes** — dependency caches, build outputs, Xcode's derived data. Clones
from uncleanly-killed VMs are not reclaimed automatically.

**Fix.**

```sh
# See what's there.
du -sh ~/Library/Application\ Support/gitea-macos-runner/*
ls -la ~/Library/Application\ Support/gitea-macos-runner/vms

# With the daemon stopped, remove stale clones.
gitea-macos-runner service uninstall     # or stop the daemon
rm -rf ~/Library/Application\ Support/gitea-macos-runner/vms/<stale-clone>
gitea-macos-runner service install
```

Only delete entries under `vms/` — `images/` holds the base images you'd otherwise have to rebuild.
Longer term: raise `storage.minFreeDiskGB` so the guard trips earlier, delete unused base images
with `image delete`, and remember an Xcode image needs 140 GB+ of headroom, more with two
concurrent clones diverging.

---

## `image build` prints the banner and then nothing at all

**Symptom.** `image build` prints

```
building image 'default' (this takes a while; the IPSW alone is ~15 GB)
```

and then stops — no stage lines, no progress bar, no error. Activity Monitor shows the process
using no CPU and no VM services running. Ctrl-C does nothing.

**Cause.** A bug in releases before this fix. `image build` hosts an `NSApplication` run loop
(Virtualization.framework requires one), and the work was started with a `Task` that inherited the
main actor. Because `NSApplication.run()` is itself reached from Swift's async `main`, the main
dispatch queue already had a block in flight and would not re-enter — so the build task was queued
behind a run loop that never yields and never got a first tick. Nothing ran, including the code
that would have reported the error. `SIGINT`/`SIGTERM` handling was stuck the same way, which is
why Ctrl-C did not work either.

**Fix.** Upgrade. The build task is now detached and signals are handled off the main queue. You
should see stage lines within a second or two:

```
resolving restore image…
loading restore image metadata…
creating VM bundle (disk 64 GB)…
installing macOS  [########----------------------]  27%
```

If a build still goes quiet, the line last printed tells you which stage owns the silence — see
below.

---

## `image build` sits at "loading restore image metadata…"

**Symptom.** The build reaches `loading restore image metadata…` and stays there. After a minute it
adds:

```
still loading — a truncated or partially downloaded .ipsw can block here; verify the download completed
```

**Cause.** `VZMacOSRestoreImage.image(from:)` reads the whole archive's metadata and reports no
progress while it does. On a healthy ~21 GB IPSW this takes seconds to a minute or two. On a
*partial* download it can block for a very long time instead of failing.

**Fix.** The obvious checks are now made before the framework is handed the file — it must exist, be
a regular file, be at least 1 GB, and start with the zip magic `PK` — so an incomplete download now
fails immediately with its actual size rather than hanging. If you are on an older build, check by
hand:

```sh
ls -la ~/Downloads/UniversalMac_*.ipsw          # ~15-22 GB, no .download/.crdownload sibling
xxd -l 2 -p ~/Downloads/UniversalMac_*.ipsw     # must print 504b
```

Anything smaller, or not starting `504b`, is an incomplete or wrong file: delete it and download it
again.

> A pattern that matches **more than one** IPSW is refused outright, listing the matches — for
> example `~/Downloads/UniversalMac_27.0_*.ipsw` when two 27.0 builds are sitting in `~/Downloads`.
> Name exactly one of them.

---

## `image build` hangs at install

**Symptom.** `image build` sits for a long time at the macOS install phase with little visible
progress.

**Cause.** Usually none — installing macOS from an IPSW genuinely takes a long time (tens of
minutes, longer on slower storage). The install phase is largely silent.

**Fix.** **Wait, and do not stop the VM mid-install.** Interrupting the installer leaves the disk
image in an undefined state; the resulting image may boot and then fail in confusing ways later.
There is no resume from a *partial* install — only from a complete one (see the next section).

If you did interrupt it, or the build genuinely failed:

```sh
gitea-macos-runner image delete <name>
gitea-macos-runner image build --ipsw <path> --name <name>
```

Before rebuilding, verify the IPSW is complete and matches your host architecture (Apple Silicon)
and version requirement (macOS 27+ for unattended provisioning), and that you have enough free disk
for the IPSW plus the target disk size.

---

## `Failed to lock auxiliary storage` right after the install finishes

**Symptom.** The macOS install runs to 100%, then:

```
first boot + guest provisioning…
error: provisioning failed: could not boot image 'default': provisioning failed: Invalid
virtual machine configuration. Failed to lock auxiliary storage.
```

**Cause.** A `VZVirtualMachine` holds an exclusive lock on its bundle's `nvram.bin` for its entire
lifetime and releases it in `dealloc`. `VZMacOSInstaller` owns a VM of its own, and older builds
resumed the caller from inside the installer's completion handler — before the framework's frame
had unwound and dropped the last reference. First boot then constructed a *second* VM over the same
bundle and lost the race.

**Fix.** Upgrade. Two changes address it:

- The install now tears down its VM on its own serial queue and resumes the caller only from a
  later block on that queue, so the installer's VM is deallocated before `install()` returns.
- First boot retries specifically on this failure for up to 30 s (2 s apart), printing
  `waiting for installer to release the VM bundle…`. Any other configuration error still fails
  immediately — an invalid configuration does not become valid by waiting.

Nothing is lost when it does happen: the install is complete, so re-running `image build` resumes.

---

## `image build` resumes an installed-but-unprovisioned image

**Symptom.** A previous `image build` finished installing macOS and then failed at first boot or
provisioning. Re-running it prints:

```
image default already installed — resuming first boot + provisioning
```

**This is intended.** An `image build` that fails after the install has left an hour of work on
disk, and throwing it away to redo an identical install is not a reasonable default. When the
bundle exists, is complete, and is not yet marked provisioned, the install phase is skipped and the
build goes straight to first boot.

It is safe because provisioning is exactly what did *not* happen: the guest has never been booted,
so its first boot is still ahead of it and `VZMacGuestProvisioningOptions` — which macOS evaluates
only on the first boot after a restore — still applies.

**The one ambiguous case.** The bundle on disk cannot say whether an earlier run got far enough to
*boot* the guest. If it did, that single chance at automated Setup Assistant is spent. Rather than
guess, the resume boots and waits for SSH: if the guest answers, provisioning was never applied and
the build continues normally. Only if SSH times out does it stop, and it then tells you so
explicitly — that state is unrecoverable, and the fix is `image delete` followed by a fresh build.

An image that is already `provisioned` is untouched; `image build` still refuses with
`image '<name>' already exists`. To re-run provisioning on a finished image, use
`gitea-macos-runner image provision <name>` instead.

---

## SSH fails with "No route to host" (errno 65) mid-run

**Symptom.** A command that had *just* talked to the guest successfully suddenly cannot reach it —
most visibly `image provision`, which waits for SSH, reports the first provisioning step, and then
dies on the upload:

```
first boot + guest provisioning…
provisioning: system configuration (provision.sh)
error: provisioning failed: could not upload provision.sh from …/provision.sh:
  ssh failed: cannot connect to 192.168.65.232:22: … No route to host) (errno: 65)
```

**Cause.** On macOS 15 and newer, an app that has not been granted Local Network access does not get
a "permission denied": the packet filter answers **`EHOSTUNREACH` — errno 65, "No route to host"**,
which is indistinguishable from a guest that is genuinely off the network. Guests here live on a
host-private NAT link that is reachable whenever the VM is up, so on this path errno 65 is far more
often the privacy filter than a routing problem.

Two details make it look intermittent rather than like a permission problem:

- **The grant is keyed on the executable's UUID.** Per
  [TN3179](https://developer.apple.com/documentation/technotes/tn3179-understanding-local-network-privacy),
  Local Network privacy "uses your main executable UUID as part of its implementation", and the
  linker mints a fresh `LC_UUID` on essentially every build. A `make install` after a code change
  therefore presents a program macOS has never seen, whose permission is undetermined again — even
  though the binary you ran ten minutes ago worked.
- **Processes started over SSH are exempt.** Running the same command through `ssh you@host …`
  succeeds while running it from a GUI Terminal fails. A remote-shell success proves nothing about
  the interactive path.

**Fix.** Allowlist the subnet — it is keyed on the network, not on the app, so no rebuild can
withdraw it and no prompt has to be answered:

```sh
sudo defaults write com.apple.network.local-network \
  AllowedEthernetLocalNetworkAddresses -array "192.168.64.0/18"
sudo defaults write com.apple.network.local-network \
  AllowedWiFiLocalNetworkAddresses -array "192.168.64.0/18"
sudo reboot
```

The values are only read at boot, so **the reboot is not optional** — until it happens, `defaults
read com.apple.network.local-network` shows the new setting while the filter still behaves as
before.

Use `/18`, not `/24`. Virtualization.framework's NAT starts at `192.168.64.0/24` but chooses the
subnet at runtime and steps to the next free /24 when that one is in use, so hosts drift to
`192.168.65.x` and beyond. An allowlist naming a single /24 that the NAT has since moved off is the
worst case: it reads as configured, `doctor` used to call it a pass, and every guest connection
still fails with errno 65. `doctor` now warns instead when the allowlist does not cover
`192.168.64.0`–`192.168.127.255`.

**Verifying.** After the reboot, `gitea-macos-runner doctor` should show `local network access` as a
pass naming the range. Re-run the command that failed; nothing else needs redoing, and
`image provision` is idempotent, so a partially completed run is safe to repeat.